List of Items:

MACHINING:

Fadal 6030HT VMC, 1999 model, with 21-station CAT 40 tool changer, rigid tapping, high speed CPU, 32mp control, expanded memory (166), coolant through spindle, 10,000 rpm spindle, 230/440v-3ph, model 907-1, sn. 9903509;

Fadal 4020HT VMC, 1998 model, 32mp control, 21-station CAT 40 tool changer, glass scales, 230/440v-3ph, model 906-1, sn. 9810936;

Fadal VH165 4^th axis attachment, sn. 4920298;

Gorton Tracemaster equipped with TruTrace, 440v-3ph;

Bridgeport vertical mill, 1hp., DRO digital readout, sn. 12BR195118;

Bridgeport vertical mill, 1hp, sn. 19087;

REM engine lathe; 230v-3ph;

(2) toolholder carts; assorted CAT 40 toolholders;

(2) Kurt D688 vises;

hold-downs;

3’x10’ and 3’x14’ steel precision tables;

assorted CAT 40 toolholders and lots of assorted perishable tooling;

FABRICATING:

Lincoln Squarewave 175 TIG welder, sn. 10367U19903038853;

Carleton 4’x9” radial drill, 440v-3ph; drill table,

Grob 4V-18 vertical bandsaw, 1996, 18” throat, 230v-3ph, sn. 5605;

Wells horizontal metal cutting bandsaw;

Dry Rod electrode oven;

WOODWORKING:

DSZA 16” jointer, 230v-3ph;

Rockwell RC-63 24” planer, 230v-3ph;

Porter Cable 10” vertical belt grinder;

1” vertical belt grinder with integrated dust collector;

State model S3 vertical spindle sander;

Shopsmith;

Craftsman 6” floor model jointer;

Kindt-Collins 24” model “R” floor model disc sander, sn. 5169;

Delta Unisaw model 36-859, equipped with Biesemeyer fence, 230v-1ph;

Craftsman 12” radial arm saw;

lots of cabinet clamps and pipe clamps;

Delta dust collector;

WAREHOUSE RACKS:

(4) different types consisting of: (12) uprights, (36) crossbeams, (53) mesh decks; (11) uprights, (42) crossbeams, (40) mesh decks; (2) uprights, (6) crossbeams; (3) uprights 6’x10”x30”, (16) side beams;

MISC:

Hyster S50XL LP forklift, 4,750lb cap., 189" lift height, 3 section mast, 18xx hours, sideshift, sn. C187V152625;

Big Joe 1000lb lift;

(2) new unused Bosch MP-1500 115v diesel generators;

(2) new 100,000btu 200/230v-3ph/natural gas HVAC units;

(1) gas generator;

10hp horizontal compressor, 230v-3ph;

Honda GC160 5hp powerwasher;

Red Lion concrete mixer;

Dayton 5gal concrete mixer;

5,000lb platform scale with IQ-Plus 710 digital readout;

antique National counting and weighing platform scale;

150,000 and 55,000 and 35,000 kerosene Reddy Heaters;

460v and 230v hydraulic pumps;

C-H sandblaster;

Eutalloy Superjet;

Trinco 42x26C/450DLX blast finishing cabinet,

Trinco 36x24 blast finishing cabinet;

Trinco 450C dry blast media hopper;

Trinco DEDC dry blast filter unit;

Clarage #13 air mule;

24” belting;

Rosaen hydraulic filtering unit;

fasteners and bins; supplies; much more.
 

Bidders paying in currency in amount of $10,000 or greater will be required to complete IRS Form 8300.

We often are asked how a bidder should bring cashier's checks when the bidder does not know how much he/she will be spending. If you bring cashier's checks made payable to yourself in various increments, you can endorse them over to us and we will refund any overpayment.

We do not accept credit cards or debit cards. We no longer accept "convenience" checks drawn on credit cards since our bank will not process them. 

This auction will have Internet bidding on some items through Bidspotter.com  You may qualify to bid online by submitting a proper letter from a reliable financial institution guaranteeing payment as outlined above no later than 24 hours before the auction commences. Full payment must be paid by wire transfer before 5pm on the day following the auction. Contact us for specific wire instructions.

A 10% Buyer Fee will be added to all purchases on site.  A 15% Buyer Fee will be added to all purchases made through the Internet.

All items are sold "as is" and "in place" and "with all faults known and unknown". No property is to be removed until paid for in full. Please settle with the cashier within 15 minutes after the close of the auction. The Auctioneer and Owner or their designee reserve the right to add to, split, bunch up, withdraw or delete lots, or bid on Owner's or lien holder's behalf during the course of the auction sale. Sales tax will be charged where applicable. Leased items, if any, are sold subject to Lessor's approval. More detailed terms may be listed in auction day catalog and on the back of your bidder registration card. 

Absentee Bids: If you are unable to attend the auction sale, we can bid for you. You must submit a blank check accompanied by a bank letter guaranteeing payment to Cotten Commercial Auctioneers, Inc. in the amount of your maximum bid plus the Buyer's Fee, if applicable. We will bid for you as if you are actually present, however, we assume no liability to bidders for missed lots where bids are not presented.
Inspection and Preview: Inspection from 11am to 3pm, Tuesday, October 21, and from 8:00 AM on auction day. Although every effort has been made to publish reliable information regarding the property to be sold, Cotten Commercial Auctioneers, Inc. makes no warranty, expressed or implied, as to the accuracy of the information contained herein. The description, measurements, model and serial numbers, age, quantities, weights, condition, odometer and hour meter readings as outlined in the brochures and catalogs and invoices are believed to be accurate, but are for merely for the Auctioneer's identification of the respective items and not a warranty that such information is correct. For this reason the buyers should avail themselves of the opportunity to inspect the property to be sold prior to the auction sale. Any announcements made day of sale shall take precedence over prior advertising or printed matter.
Removal of Purchases: All purchases must be removed from the premises before 5pm Thursday, October 30, 2008. All items are sold "in place" with removal at purchaser's risk and expense. All purchases become the Buyer's responsibility at the time of sale, and the Seller and the Auctioneer assume no responsibility or liability for loss, damage, or injury to persons or property before, during, or after the auction sale. Protect your purchases once the auctioneer says "sold". The bidder agrees to hold harmless, defend, and indemnify Auctioneer for any personal injury or property claims resulting from attendance. This provision shall include unregistered persons attending with bidder. Movers and riggers must provide a valid certificate of insurance prior to dismantling any equipment.

Back to Top