AUCTION
selling the former assets of
Kalina Machine and Auto Parts
by order of Secured Party
909 W. Main Street
Peoria, Illinois
Tuesday, December 14, 2010, at 10:00 a.m.

No removal of purchases will be permitted while auction is in progress.

Click on photos to enlarge the photo in a new window - close window to return to this page. 

Return to
Home Page

Berco model STC361 1314B hydraulic surface grinder; Kansas Instruments TCM-25 valve guide and seat machine, with pneumatic table; Winona Van Norman crankshaft grinder, model CG280 - 810659; Kansas HCI-DP wet honing cabinet with Powerstroke; Rottler FA4B boring bar; (2) Kwik-Way portable boring bars; Bridgeport vertical mill, sn. BR38437; Jet model GHB-1340-A engine lathe; Cincinnati engine 15x60 engine lathe; Rockwell floor model drill press; Abarboga Maskiner (Sweden) radial drill; Nugier H80 80-ton air over hydraulic h-frame press; Miller Synchrowave 250 TIG welder with Miller Coolmate-4 feeder, 208-23-460v-1ph; CCP model 190ST lock’n’stitch cast iron welder; Hobart MIG welder, 440v-3ph; acetylene torch cart; Ramco RS-90P horizontal metal cutting bandsaw; 360-degree jib crane with 1/2-ton electric hoist; jib crane with 1500lb Coffing electric hoist; jib crane with Budgit electric hoist; Gorbel 1000lb gantry crane, 16'3" x 32'3" x 12' high; C-Aire 7.5hp vertical air compressor, 208-230-480-3ph; Curtis 10hp horizontal air compressor; Trinco 36x30 manual blast cabinet w/filtration; Peterson AB502B enclosed shot blaster, with Kansas Instruments oven; model EC2000G4 evaporator; and model SRT-40 parts tumbler; Kwik-Way valve refacer; Neway seat cutting station; Master HLM-14A belt sanding station; Hyster LP forklift truck; CCP model CCP45 head straightening oven; MTE model 5035 head straightening oven; ABS head assembly station; Sunnen LBB1299 rod honing machine; assorted honing mandrels to 3"; Sunnen GRG-500 rod or crank cap grinder; (2) Sunnen connecting rod aligners; Sunnen CRH-50 connecting rod heater; Sunnen BP-10 piston pin press with BP-99 hydraulic pump and assorted press arbors; Perfect Circle piston nurlizer; Taft-Pierce Manufacturing Co. vintage cam bearing alignment reamer tool; Grease Monkey GM500 ultrasonic parts cleaner; Sonoflux magnetic flux tester; Master Tool Co. 50RLAUTO pressure testing station; Peterson FG-24 flywheel grinder; Peterson Machine P-54 jet spray parts washer; PMW parts rinsing tub; Van Norman BD6228 brake drum lathe; Van Norman 415 brake rotor lathe; custom crankshaft straightening fixture; QuietAire swamp cooler; Husky 11-drawer tool cabinet; (2) 42" shop fans; corner workstation office desk; Dorman small parts drawer cabinet; assorted small hand tools and automotive parts, crankshafts, heads, perishable tooling, etc, many other items. 

Bidders paying in currency in amount of $10,000 or greater will be required to complete IRS Form 8300.

We often are asked how a bidder should bring cashier's checks when the bidder does not know how much he/she will be spending. If you bring cashier's checks made payable to yourself in various increments, you can endorse them over to us and we will refund any overpayment.

We do not accept credit cards or debit cards. We no longer accept "convenience" checks drawn on credit cards since our bank will not process them. 

A 10% Buyer Fee will be added to all purchases made onsite. A 15% Buyer Fee will be added to online purchases through Bidspotter.com

All items are sold "as is" and "in place" and "with all faults known and unknown". No property is to be removed until paid for in full. Please settle with the cashier within 15 minutes after the close of the auction. The Auctioneer and Owner or their designee reserve the right to add to, split, bunch up, withdraw or delete lots, or bid on Owner's or lien holder's behalf during the course of the auction sale. Sales tax will be charged where applicable. Leased items, if any, are sold subject to Lessor's approval. More detailed terms may be listed in auction day catalog and on the back of your bidder registration card or posted on-site for your review. 

Absentee Bids: If you are unable to attend the auction sale, we can bid for you. You must submit a blank check accompanied by a bank letter guaranteeing payment to Cotten Commercial Auctioneers, Inc. in the amount of your maximum bid plus the Buyer's Fee, if applicable. We will bid for you as if you are actually present, however, we assume no liability to bidders for missed lots where bids are not presented.
Inspection and Preview: Inspection from 8:00 AM on auction day. Although every effort has been made to publish reliable information regarding the property to be sold, Cotten Commercial Auctioneers, Inc. makes no warranty, expressed or implied, as to the accuracy of the information contained herein. The description, measurements, model and serial numbers, age, quantities, weights, condition, odometer and hour meter readings as outlined in the brochures and catalogs and invoices are believed to be accurate, but are for merely for the Auctioneer's identification of the respective items and not a warranty that such information is correct. For this reason the buyers should avail themselves of the opportunity to inspect the property to be sold prior to the auction sale. Any announcements made day of sale shall take precedence over prior advertising or printed matter.
Removal of Purchases: All purchases must be removed from the premises before 5pm Friday, December 17, 2010. All items are sold "in place" with removal at purchaser's risk and expense. All purchases become the Buyer's responsibility at the time of sale, and the Seller and the Auctioneer assume no responsibility or liability for loss, damage, or injury to persons or property before, during, or after the auction sale. Protect your purchases once the auctioneer says "sold". The bidder agrees to hold harmless, defend, and indemnify Auctioneer for any personal injury or property claims resulting from attendance. This provision shall include unregistered persons attending with bidder. Movers and riggers must provide a valid certificate of insurance prior to dismantling any equipment.

Back to Top