Fax: (309) 674-8940
email:  cottenauctions@aol.com

AUCTION
Mangis Motor Service Co.
sale held at the TNT Storage facility located at
7305 S. Adams St. (Route 24)
Bartonville (Peoria), Illinois
Wednesday, November 16, 2005

starting promptly at 10:00 a.m.

Click on photos to enlarge the photo in a new window. 
Additional items are listed at the bottom of the page.

Home  Location map and
 directions to sale
Download or print out
 the inventory lists of
over $80,000 in parts here
View or print the
sale day catalog
updated Nov. 4
4 page PDF file
Kwik-Way model 020 Head Shop (fully tooled with all seat and guide tooling), sn. 5747 Kwik-Way model FL boring bar, sn. FL 731, fully tooled; with Kwik-Way 054 boring stand Kwik-Way SVS valve refacer with rollaround cabinet Sunnen LBA wet rod hone
Lempco 60Ton hydraulic press with OTC 50-Ton electric power pump and fixtures 5hp-3phase vertical air compressor Trinco model 36 blast cabinet with collector Sunnen CRG-750 cap & rod grinder
Ammco model 8000 Safe Arc brake shoe grinder with extra belts Peterson #50 Vibramotive surface grinder Kwik-Way crankshaft centering stand Wausau PrecisionKnurl
Kwik-Way crank polisher Perfection Universal clutch rebuilding machine hydraulic shop crane Rimac valve spring pressure tester
Neway master valve seat cutter set with power driver and bench and pilots from 5.5mm to 9/16 Engine stand Chicago heavy duty floor model brake riveter Budgit roller chain hoist

 

typical view of inventory and shelving typical view of inventory and shelving crank rack and crankshafts Everco brass hardware assortment with bin rack
portable lift table parts washing station Piston pin fitting mandrels and 54 other mandrels Dorman parts counter
arc welder

 

NilFisk commercial vaccuum w/asbestos filtration

AUTOMOTIVE PARTS INVENTORY LIQUIDATION: Over $80,000 at cost inventory, including name brand products by Belden; BorgWarner; Carter; Dorman; Federal Mogul; Felpro; Four Seasons; Moog; Perfect Circle; Precision; Raybestos; Sealed Power.  Also, Everco brass hardware assortment with bin rack; Dorman drawered hardware assortment with Dorman countertop; automotive parts catalogs and references; Motor manuals from 1950s up; (2) double deck catalog racks with lighting; clutch facing materials and friction materials; huge brass rivet assortment; Continental industrial engine parts, gaskets, cylinder heads and crankshafts;

ANTIQUE & CLASSIC AUTO PARTS: including: knee-action shocks; ignition; timing; rocker shaft and valvetrain; chassis and engine parts; head gaskets; clutches; MG and Hudson 262 cylinder heads; 318 Dodge Desoto heads; assorted con rods including babbit rods; vintage water pumps (Rambler, Hudson, etc.); crankshafts including Ford flathead v-8, 57-61 364 Buick; vintage engine display stand; Cad 2-2bbl Detroit racing manifold; 29-39 Chevy rocker arms; numerous other items.

AUTOMOTIVE MACHINE SHOP TOOLS:  Kwik-Way model 020 Head Shop (fully tooled with all seat and guide tooling), sn. 5747; Kwik-Way model FL boring bar, sn. FL 731, fully tooled; Kwik-Way 054 boring stand; boring bar adaptors for flathead Ford V-8 and Chrysler flathead 6; boring bar adaptor for 348/409 Chevy angle top block; Kwik-Way crankshaft polisher and centering lathe stand; Kwik-Way SVS valve refacer with rollaround cabinet; Kwik-Way air valve seat grinder with stones and arbors; Kwik-Way portable valve seat cutter; Kwik-Way 3-angle valve seat cutter; Kwik-Way Portable line boring bar with tooling for babbitt mains including centerline master fixtures for flat head Ford model T and V-8; assorted valve guide reaming and resizing tooling; valve shim assortment; Neway master valve seat cutter set with power driver and bench and pilots from 5.5mm to 9/16; Sunnen CRG-750 cap & rod grinder; Sunnen LBA wet rod hone; Sunnen AG300 precision gauge; Sunnen connecting rod and extra long king pin honing mandrels and 54 other mandrels; Sunnen rod vise; Sunnen rod & piston alignment gauge; Sunnen piston pin pressing fixture set; Wausau Precisionurl piston knurlizer; Peterson #50 Vibramotive surface grinder; Lempco 60Ton hydraulic press with OTC 50-Ton electric power pump and fixtures; Nugier bearing press fixture set; 5hp-3phase vertical air compressor; Graymills parts washing station; Rimac valve spring pressure tester, 250#; Budgit ton roller chain hoist; Dayton 500lb hoist; CM trolley hoist; Trinco model 36 blast cabinet with collector; Silver Beauty 9225 arc welder; Chicago heavy duty floor model brake riveter; Ammco model 8000 Safe Arc brake shoe grinder with extra belts; NilFisk commercial vaccuum w/asbestos filtration; Perfection Universal clutch rebuilding machine; large assortment of OTC pullers; alternator and starter bench testers; 4-wheel engine stand; hydraulic shop crane; metal shop desk; work benches; vises; ramps; jacks; hand tools; Ford flathead tools; Autolite spark plug cleaning station; assorted 12x36; 18x36; 24x36 Lyons shelving; 8x8x3 Equipto pallet racking;    Terms of Sale: Cash payment in full day of sale. Checks with proper ID. 10% Buyer Fee will be added to all purchases.  Inspection at 8am on sale day. Sale held in unheated building dress appropriately. All purchases must be removed by 5pm, November 18, 2005.

Terms of Sale: Cash payment in full day of sale, in the form of U.S. currency, or guaranteed funds in the form of cashier's checks or certified checks, or by wire transfer to Auctioneer's escrow account. Personal or company checks must be accompanied by bank letter guaranteeing payment if you are unknown to us. We do not accept credit cards or debit cards. We no longer accept "convenience" checks drawn on credit cards since our bank will not process them.  All items are sold "as is" and "in place" and "with all faults". No property is to be removed until paid for in full. Please settle with the cashier within 15 minutes after the close of the sale. The Auctioneer reserves the right to add to, split, bunch up, or delete lots during the course of the auction sale. Sales tax will be charged where applicable. Leased items, if any, are sold subject to Lessor's approval.  

A 10% Buyer Fee will be added to all purchases.

Absentee Bids: If you are unable to attend the auction sale, we can bid for you. You must submit a blank check accompanied by a bank letter guaranteeing payment to Cotten Commercial Auctioneers, Inc. in the amount of your maximum bid plus the Buyer's Fee, if applicable. We will bid for you as if you are actually present.
Inspection: Inspection from 8 AM on sale day. Although every effort has been made to publish reliable information regarding the property to be sold, Cotten Commercial Auctioneers, Inc. makes no warranty, expressed or implied, as to the accuracy of the information contained herein. For this reason the buyers should avail themselves of the opportunity to inspect the property to be sold prior to the auction sale. Any announcements made day of sale shall take precedence over prior advertising or printed matter.
Removal of Purchases: All purchases must be removed from the premises before 5pm November 18, 2005. All purchases become the Buyer's responsibility at the time of sale, and the Seller and the Auctioneer assume no responsibility or liability for loss, damage, or injury to persons or property before, during, or after the auction sale. Movers and riggers must provide a valid certificate of insurance prior to dismantling any equipment
.

Back to Top

Fax: (309) 674-8940
email:  cottenauctions@aol.com

Cotten Commercial Auctioneers, Inc.
Illinois License #044000115

Joe Cotten
Registered Illinois Real Estate Broker
Cotten Real Estate Company
Established 1950
Cotten Commercial Auctioneers, Inc.
Indiana License #AC30300095
Joe Cotten - Registered Illinois Auctioneer License #041000209   Joe Cotten - Registered Indiana Auctioneer License #AU10300141